ManualMills
CNC Mills
CNC Knee
Mills
CNC Bed Mills
CNC Mini Mill
Machining Centers
Mini Mills
Heavy Duty
Series
RF Mill
RF Band Saws YCL Series
CT-1440G
ACCU Series 1
ACCU Series 2
LUX Series
DL Series
NSL Series 1
NSL Series 2

Hydraulic Shears
Heavy Duty
Series
Deluxe Series
Hydraulic Plate
Rolls
Initial Pinch
Series
Double Pinch
Series
Hydraulic Press
Brakes
Hydraulic Brakes
Box and Pan
Type
Manual Brakes
Box and Pan
FloorType
Apron Straight
FloorType
Brake,Bench
Type
Locking Former
L-20
Slip Rolls
Power slip
Rolls
Manual slip
Rolls
Foot Shear
Hand Notcher
Rotary Machine
 Copy Shaping
Machine
LH Series
Router SR Series
Planner &
Moulder
Products 1
Products 2
Products 3
Products 4
Jointer
Shaper/Mortiser/Collector
Products 1
Products 2
Saw
Products 1
Products 2
Products 3
Products 4
Sander
Products 1
Products 2
Products 3
Finger Jointer

DL1840/1860/1880
DL2280/2260/2240/2480/2460/2440
DL26/32/40
Between Center: 40"/60"/80"/120"
Swing over bed : 18"
Width of bed: 16"
10HP main motor, 220V/440V 3Ø
  49 kinds of inch threads.
  16 speeds from 16-1600 RPM
  D1-8 CAMLOCK WITH 3-3/16"spindle bore.
  Handwheel can be desengaged rapidly.
  Main spindle hardened and precision ground.
  Bed cast of fine grain high tensile cast iron.
  Bedways induction hardened& precision ground.
  All gears and shafts hardened and precision ground.
  4-way rapid traverse to longitudinal and cross
  Automatic lubrication system in headstock and feed box.
  Main spindle supported at 3-points by precision bearings.
  Full length foot brake, quick and reliable.
   
Swing over bed 22"/26"
Between centers: 40"/60"/80"/120"
Width of bed 16"
  10 HP main motor 220V/440V 3Ø
  49 kinds of inch threads.
  16 speeds form 16-1600 RPM.
  D1-8 camlock with 3 3/16" spindle bore.
  Handwheel can be desengaged rapidly.
  Main spindle hardened precision ground.
  Bed made of fine grain high tensilbe cast iron.
  Bedways induction hardened& precison ground.
  All gears and shafts hardened and precision ground.
  4-ways rapid traverse to carriage & cross slide.
  Automatic lubrication system in headstock & feed box.
  Main spidle supported at 3-points by precision bearings.
  Full length foot brake, quick and reliable in action.
   
Swing over bed 26"/32"/40"
Between centers: 40"/60"/80"/120"/160"/200"
Width of bed 21 21/32"
  20 HP main motor(15 HP ON DL-26 series only).
  67 kinds of inch threads.
  18 speeds from 7.5 to 1000 RPM
  D1-11 camlock with 5" spindle bore.
  Main spindle hardened Z& precision ground.
  Bed made of fine grain high tensible cast iron.
  4-way rapid travers to carriage & cross slide.
  Bed ways induction hardened & precision ground.
  All gears and shafts hardened & precision ground.
  Spindle supported at 3-point by precision bearings.
  Automatic lubricaiton system in headstock & feed box.
  Hydr-control multi-disc clutch for spindle turining & brake.
   
  9906 Gidley St., El Monte, CA 91731Telephone: (626) 579-9696Facsimile: (626) 579-9697Email: info@cptools.com