|
|
 |
 |
 |
|
Hardened
and ground bedways and splined shafts in headstock. |
|
9 speeds all geared Headstock from 50 to 1500 RPM |
|
1 1/2 HP single phase 220 v motor. |
| |
|
Emergency
stop button equipped on the front of headsotck |
| |
|
Jog
button for easy engagement and including spindle |
| |
|
Extra
safety switch shuts down machine entirely for changing belt
or gear for threading cutting. |
| |
|
Built
in full size splash guard and lamp for worker's convenience
. |
| |
|
Floor
stand is included. |
| |
|
Swing
Over Bed 12" |
| |
|
Between
centers; 36" D1-4 with 1 1/2" Spindle Bore |
| |
|
Width
of Bed: 8" |
| |
|
 |
|
 |
 |
|
|
Swing Over Bed 13" |
|
Between Centers 40" |
|
D1-4 with 1 3/8" Spindle Bore |
| |
|
Width
of Bed 7 3/8" |
| |
|
Lathe
bed is constructed of high tensile strength cast iron, rigid
structure with hardened and ground ways |
| |
|
Precision
main spindle loaded on high quality precision bearing(2ea) 30212-30210
|
| |
|
8
speed headstock with 70 to 2,000 rpm. Speed changes by headstock
quick change lever action. |
| |
|
Permanently
filtered oil headstock bath provides clean running oil for long
life of bearings & Gears. |
| |
|
2HP
main motor- heavy duty for its class, wired 220 single phase.
|
| |
|
Manufacture
includes heavy duty floor stands, along with full length splash
guard as standard equipment . |
| |
|
|
|
 |
 |
|
|
Swing
Over Bed 14" |
|
Between Centers 40" |
|
Width of Bed: 8" |
| |
|
Hardened
and ground bedways and splined shafts in headstock. |
| |
|
16
speeds all geared headstock from 45 to 1800 RPM |
| |
|
3HP
three phase 220 v motor |
| |
|
Foot
brake giving rapid brake and built in coolant system. |
| |
|
Emergency
stop button equippped on the front of headstock. |
| |
|
Jog
button for easy engagement and including spindle. |
| |
|
Extra
safety switch shuts down machine entirely for changing belt
or gear for threading cutting. |
| |
|
Open
type chip pan easily to remove chips. |
| |
|
|
|
|
 |
| |
9906
Gidley St., El Monte, CA 91731 Telephone:
(626) 579-9696Facsimile:
(626) 579-9697Email:
info@cptools.com
|
|
|
ManualMills
CNC
Knee
